usage
- removal: high-strength thread lockers can be disassembled by using either heat application or increased torque.
- cleaning: prior to the application, ensure the bonding area is clean. use a cloth or steel brush to remove any debris.
- if oil residue is present, it must be removed.
- blind holes: for blind holes, it is more appropriate to apply the adhesive within the hole.
- long joints: in the case of long joints, apply adhesive to both the screw and the interior of the hole.
- accelerating cure: the curing process can be expedited by using the mxbon activator.
lock in reliability with mxbon thread locker sealant
characteristics
-
11222
low strength, thixotropic
lock and seal for m6 or smaller screws.
removable. -
11242
medium strength, general-purpose, thixotropic
lock & seal for m20 or smaller screws.
good for electroplating surface.
removable. -
11243
medium strength, oil tolerance, thixotropic
lock & seal for m20 or smaller screws.
suitable for lightly greased surfaces and passive substrates such as, stainless steel & electroplating surface.
removable. -
11248
medium strength, wax consistency
lock & seal for m20 or smaller screws.
semi solid stick form is incredibly convenient and portable, also suitable for lightly greased surfaces and passive substrates such as, stainless steel & electroplating surface.
removable. -
11262
high strength, high lubricity, thixotropic
lock & seal for m20 or smaller screws for permanent.
excellent rust and corrosion resistance in harsh environments. -
11263
high strength, chemical resistant, fast curing, oil tolerance
lock & seal for m25 or smaller screws.
suitable for lightly greased surfaces and passive substrates such as, stainless steel & electroplating surface. -
11271
high strength, low viscosity, general-purpose
lock & seal for m25 or smaller screws for permanent.
-
11272
high strength, thixotropic, heat resistance
heat resistance up to 230°c.
lock & seal for m36 or smaller screws for permanent. -
11277
high strength, high viscosity
excellent chemical resistance, prevents rusting and corrosion of screws.
lock & seal for m36 or smaller screws for permanent. -
11290
medium to high strength, penetration type
lock & seal for m2~m12 screws after assembly, effective for sealing micro-pores on weld seams and castings.
prevents rusting and corrosion of screws. -
112701
high strength, for passivated materials
excellent heat and oil resistance.
specialized adhesive for passivated materials.
lock & seal for m20 or smaller screws.
technical information
| item no. | appearance | fluorescence |
viscosity mpa.s |
breakaway n-m (ib-in) |
prevail n-m (ib-in) |
working temp. °c |
curing time | nsf | |
|---|---|---|---|---|---|---|---|---|---|
| fixture time | fully cured | ||||||||
| 11222 | purple | 900–1,500 thixotropic |
6 (52.8) |
4 (35) |
-54°c–150°c | 15min | 24hrs | ||
| 11242 | blue | 900–1,400 thixotropic |
8-19 (70-167) |
3-7 (26-62) |
-54°c–150°c | 5min | 24hrs | ||
| 11243 | blue | 1,300–3,000 thixotropic |
26 (229) |
5 (44) |
-54°c–180°c | 10min | 24hrs | ||
| 11248 | blue | wax consistency | 23 (204) |
5 (44) |
-54°c–150°c | 5min | 24hrs | ||
| 11262 | red | 1,200–2,400 thixotropic |
26 (229) |
32 (282) |
-54°c–150°c | 10min | 24hrs | ||
| 11263 | red | 400–600 | 34 (299) |
34 (299) |
-54°c–180°c | 10min | 24hrs | ||
| 11271 | red | 400–600 | 17–40 (150–352) |
23–40 (202–352) |
-54°c–150°c | 10min | 24hrs | ||
| 11272 | red | 4,000–15,000 thixotropic |
34 (299) |
36 (317) |
-54°c–230°c | 30min | 24hrs | ||
| 11277 | red | 6,000–8,000 | 32 (282) |
32 (282) |
-54°c–150°c | 30min | 24hrs | ||
| 11290 | green | 20–55 | 10 (88) |
29 (255) |
-54°c–150°c | 20min | 24hrs | ||
| 112701 | green | 500–900 | 26–50 (229–440) |
≧15 (≧132) |
-54°c–150°c | 10min | 24hrs | ||
contact us contact us